• Standard
Electrical Characteristics
— 120
volts, 50-60 Hz, 3-wire cord and plug (Available only on Model
MCD)
— 240 volts, 50-60 Hz, 3-wire cord
— Other electrical characteristics available
•Standard
Temperature Control System
Programmable,
microprocessor based, temperature controller provides for one
program of two ramps and two dwells. Ramp from as low as 0.01°C
per minute and dwell from 0 to 9999 minutes. An independent
hydraulic thermostat, set by the operator to a temperature
slightly higher than the maximum set point, provides a mechanical
back-up should the main controller fail. An amber panel lamp
signals over-temperature situation. Optional programmable control
4 program 16 segments, ramp from as low as 1°C
per minute, dwell from 0.0 to 999.9 minutes listed below.
MC
SERIES
Designed to meet the strict requirements of semiconductor and electronic component
manufacturers. Meets Class 100 air requirements through the use of stainless
steel components (including heater elements, blower, shelves and interior walls)
without an internal filter, simplifying maintenance and cleaning.
MH SERIES WITH HEPA FILTER
Construction similar to MC Series above, plus easily replaceable 17" wide x 17" high
x 3" deep, high temperature HEPA filter to remove particles introduced from room
conditions or product load. Filter is accessible by removing stainless steel
cover held in place by four (4) stainless steel screws.
|
|
|
Circulation
Diagrams
(Front View)
|
|
|
|
MC Series
without HEPA Filter
|
|
|
|
|
MC Series
with HEPA Filter |
|
|
| ADDITIONAL
EQUIPMENT AVAILABLE |
Back
to Top |
• Additional
Shelves, 25 lbs distributed load
per shelf, 75 lbs maximum oven load, specify oven model
when ordering.
• Programmable
Temperature Controller, microprocessor based, digital
indicating, 4 program 16 segments, ramp from as low as
1°C
per minute, dwell from 0.0 to 999.9 minutes,
in lieu
of
standard
controller
|
Option
MPTC |
|
